DH-612 Notification of balance deviation data (to DSO)
Message DH-612 is of message type F19.
Message payload includes the following information:
Information field | Level | Necessity | Field content | Note |
|---|---|---|---|---|
Payload | 1 | 1..1 |
|
|
Time series identification | 2 | 1..1 |
|
|
Area information | 2 | 1..1 |
|
|
Metering grid area identification | 3 | 1..1 |
|
|
Supplier | 2 | 1..1 |
| |
Party identification | 2 | 1..1 |
|
|
Balance calculation time | 2 | 1..1 |
|
|
Deviation type | 3 | 1..1 |
|
|
Reporting period | 2 | 1..1 |
|
|
Start time | 3 | 1..1 |
|
|
End time | 3 | 1..1 |
|
|
Total sums | 2 | 0..n |
|
|
Correction total | 3 | 1..1 | EUR |
|
Total corrected energy | 3 | 1..1 |
|
|
Balance deviations | 2 | 0..n |
|
|
Accounting point identification | 3 | 0..1 | Only used for accounting point-specific series |
|
Accounting point type | 3 | 1..1 |
|
|
Metering Method | 3 | 0..1 |
|
|
Values | 3 | 1..n |
|
|
Date and time | 4 | 1..1 |
|
|
Energy entered in balance | 4 | 0..1 | kWh | Energy entered into the balance is reported for accounting points only if the supplier in question has balance responsibility registered for the hour and accounting point in question, either when the balance window closes or from a previous balance deviation calculation, and there is a metering value for the hour and accounting point in question. |
Metered energy | 4 | 0..1 | kWh | Metered energy is reported for accounting points only if the supplier in question has balance responsibility according to the balance information for the accounting point and hour in question. |
Balance deviation | 4 | 1..1 | kWh | The value is zero if metered energy and energy entered into the balance are not defined. |
SPOT price | 4 | 1..1 | EUR/MWh |
|
Metering time step | 4 | 1..1 |
|
|
Reason for deviation | 4 | 0..1 |
|
|