DH-122-2 Forwarding accounting point information to supplier

Information field

Level

Necessity

Field content

Note

Payload

1

1..1

Start of occurrence

2

1..1

Original message identification

2

0..1

The field contains the message identifier DH-122-1, DH-126-1, DH-127-1, DH-141, or DH-142, depending on the original event.

Field usage

Original message sender

2

0..1

The field contains the message identifier DH-122-1, DH-126-1, DH-127-1, DH-141, or DH-142, depending on the original event.

Field usage

Description

2

0..1

Optional reason for update or rejecting an update request.

Basic accounting point data

2

1..1

Accounting point identification

3

1..1

Accounting point status

3

1..1

• Connected

• Disconnected

• Under construction

Accounting point type

3

1..1

• Consumption

• Production

Accounting point sub-type

3

1..1

• Normal

• Building accounting point

• Production unit’s own consumption

• Virtual

Remotely connectable

3

1..1

Yes/No

Time division

3

1..1

• One rate metering

• Two rate metering night/day

• Two rate metering winter day/other

Meter number

3

0..1

Active metering meter number

Related accounting point identification

3

0..1

Identifier of the corresponding consumption or production accounting point related to the small-scale production site.

Related accounting point data is maintained using events DH-126 and DH-127. This information is not updated as part of the DH-122 event, but any existing data is also forwarded in connection with the DH-122 event.

Energy community identification

3

0..1

Energy community data is maintained using DH-14x events. This information is not updated as part of the DH-122 event, but any existing data is also forwarded in connection with the DH-122 event.

Energy community name

3

0..1

Energy community data is maintained using DH-14x events. This information is not updated as part of the DH-122 event, but any existing data is also forwarded in connection with the DH-122 event.

Is netting applied

3

0..1

0=Netting not applied
1=Netting applied

Area information

3

1..1

Metering grid area identification

4

1..1

EIC code is used.

Accounting point addresses

3

1..8

Address type

4

1..1

• Main address

• Additional address

Street name

4

1..1

Building number

4

0..1

Stairwell identification

4

0..1

Apartment

4

0..1

Postal code

4

1..1

Post office

4

1..1

Country

4

1..1

ISO 31661 ID used.

Address specifier

4

0..1

Language

4

1..1

• fi

• sv

Coordinates

3

0..1

WGS84 standard is used.

Latitude

4

1..1

Longitude

4

1..1

Accounting point characteristics

3

0..1

Mandatory if the status of the accounting point is not under construction or removed from use.

Remotely readable

4

1..1

Yes/No

Metering method

4

1..1

• Continuous metering

• Reading metering

• Unmetered

Metering time step

4

1..1

User group

4

0..1

Classification specified by Statistics Finland is used based on the purpose of electricity consumption.

Mandatory for a consumption accounting point.

Heating depending on electricity

4

0..1

Yes/No

Mandatory for a consumption accounting point.

Fuse size

4

0..1

Format used:

<number of cables>x<number of phases>x<amperes>

The number of cables is excluded if only one cable is in use.

For example, 3x25, 2x3x25

Electric power

4

0..1

Always given in kilowatts.

Annual consumption estimates

4

0..2

Time division

5

1..1

Estimated annual consumption 1

Estimated annual consumption 2

Estimated annual consumption

5

1..1

Controlled load

3

0..n

Controlled load identification

4

1..1

Controlled load name

4

0..1

Description

4

0..1

Timings

4

0..1

Control limits

4

0..1

Maximum power

4

0..1

Maximum power unit

4

0..1

• W

• kW

• MW

• GW

Storage device

3

0..n

Storage device identification

4

1..1

Storage device name

4

1..1

Storage device type

4